ADT® Authorized Dealer Serving Springfield Illinois, Decatur, & Surrounding Areas
close up of a lady adjusting the security panel
March 07, 2022

How To Reset Your Springfield Home System

An important advantage of having your security system set up by professionals is that you rarely have to make major adjustments to it. Even so, there will likely be a couple situations when you need to reset your alarms in Springfield. When using a smart command interface, your system reset usually requires just one or two tap of a button when you’ve experienced occurrences like battery changes, power outages, and false alarms.

Consult Your Manual Before Trying to Reset Your Alarm Panel

Here’s a simple yet valuable tip before you try to reset your Springfield home security system, read your owner’s manual prior to proceeding. You’ll never want to undermine your system because you hit a button in error. Additionally, control panels might be different if you moved from a numerical keypad to a modernized touchscreen interface. And if you’re unable to figure out how to reset your system, don't be reluctant to contact the professionals.

Resetting Your Springfield Home Security System Because Of A False Alarm

Generally, a false alarm takes place due to an accidentally tripped sensor. You are able to utilize the control panel or bring up the ADT mobile app and hit the shield image and submit your unique passcode to turn off the alarms when this occurs. You may get a call from your security monitoring team, but just tell them it was a false alarm.

Resetting Your Alarm Following A Power Outage In Springfield

If the power goes out because of high winds or other factors, you may start hearing a repeated, high-pitched beep from your central command hub. That indicates that your security is being powered by the backup battery. To reset your equipment and stop the beeping, you should deactivate and reactivate your system.

Keep in mind, if your power outage lasts for an extended time, you might need a complete reset of your system. Pay careful attention to the directions in your user’s handbook -- typically by submitting your code and hitting the designated button two times -- and you should be back to normal. You may still hear chirping caused by the secondary power source, as it’s possible it won’t cease until your battery is fully charged. Contact your home security agent if you continue to have difficulties with your ADT equipment 20 hours after your power is back on.

How To Reset Your Home Security System After Changing A Battery

There will be infrequent times when you must replace a battery powering one of your security devices. To do this, you will set your alarm system to "Test Mode" so you don't trigger an alarm by accident. Once the new battery is put in place, remove the alarm panel out of Test Mode and restore normal operations. If the control panel is unable to notice the device or the battery light remains on, you might have to perform a whole system reset.

Resetting Your Springfield Security System After Adding Or Deleting Someone

Adding and deleting people can be done on the ADT Command panel and the ADT Control mobile app. You shouldn't need a reset of your alarm after adding or removing a user or code. However, if you find yourself moving to a new home already equipped with an ADT alarm system, you'll want to contact your security specialists at (217) 765-0085 to set up a new plan. The installer will visit your property to upgrade outdated parts, install additional devices (as required), and reset the system for you.

An Easy-To-Use Security System Can Be Yours Today

Attempting to reset a home security system in Springfield can be difficult if it fails to include understandable instructions and features. If you would like to get your functional and powerful home security system, call (217) 765-0085 or send in the form below. Our specialists are pleased to customize the ideal security system for your property.